`

Kantech KTES Intercom Quick Start Guide

Adding Users to the Intercom

Step 1: Hold down the * button until you hear a beep, then enter the panel master code (this code supplied to you by Bullet Security)

01

Step 2 : Press 1 to select “1 – Tenant”. This will take you to the tenant list menu. From here you can search for an existing tenant or add a new one to the list.

02

Step 3 : To Add a New Tenant, press the top right button to create a new tenant.

03

Step 4 :

Press 2 to create the tenant name. This will be the name that shows up in the tenant list so it’s usually their name or unit number.

04

Step 5 :

Just like texting on a flip phone each number is assigned 3-4 letters. Keep pressing the same button to scroll through to the letter you want.

-BkSp will backspace
-Caps will toggle caps lock between Caps, CAPS, caps
-Next will put in a space
Press # to save.

05

Step 6:

Press 3 to create the tenant ID, this is also known as the dial code.

06

Step 7:

Punch in the desired tenant ID and press # to save it.

07

Step 8:

Press 5 to put in tenant’s phone number. Put a 1 in front of the phone number to ensure calling works if the number is long distance. Press # to save.

08

Step 9:

Put a 1 in front of the phone number to ensure calling works if the number is long distance. Press # to save.

09

Step 10:

If tenant requires keyless code press 4 to go to “4-pin”. Put in the code and press # to save.

10

Step 11:

Press middle of the three top buttons to save your new tenant.

11

To modify an existing tenant:

Press the top left button to go to the tenant list. From here you can scroll to the tenant you’re looking for – or you can punch in the dial code and it will take you directly there.

From this point, the steps are the same as adding a new tenant.  You simply edit the name, dial code and phone number, then Save.

12

Step 11:

Press middle of the three top buttons to save your new tenant.

11

For more info please feel free to contact us

0

Start typing and press Enter to search